Row of home appliances including a refrigerator, dishwasher, stove, washer and dryer in a bright room

Our services

Appliance Repair Services in Oak Ridge, TN

Nine repair services, one local team: stoves, microwaves, refrigerators, ovens, washing machines, dishwashers, dryers, freezers, and ice makers, diagnosed and repaired across Oak Ridge, Tennessee. The rule on every job is the same. We open it up, find the failed part, and you approve the price before any work begins.

01
Quick responseA real person answers, Mon–Fri 8–6
02
Careful diagnosisWe verify the cause before any quote
03
Clear optionsScope and price before work
04
Clean finishProtect, repair, test, tidy
05
Tested repairsEvery fix re-tested before we leave

What we fix

Pick the Service That Matches Your Problem

Each service below has its own page with symptoms, causes, and honest cost framing. Every service is handled by our local team from the Oak Ridge Quick Air Fix dispatch office on the Oak Ridge Turnpike, and we run regular routes through our Oak Ridge service areas, including Emory Valley and West Hills. We service all major brands: see the full list of brands we service. When we open up an appliance, we test the part we suspect before we quote, whether that’s an igniter, a drain pump, or a control board.

01!Urgent response

Stove Repair

Burners that will not light, a glass top with a dead zone, or an oven section running cold. The call we get most is “the igniter glows but there’s no flame,” and that’s a textbook igniter failure, not a control board. We test the igniter, heating elements, and thermostat first, because most stove problems come down to one failed part.

Stove repair details
Technician servicing a small cooking appliance on a workbench
02↯Restore flow

Microwave Repair

Runs but does not heat, turntable stuck, or the door latch feels wrong. A faulty magnetron or worn door switches cause most of these failures, and both are repairable. If the control board has failed on an older unit, we will tell you straight and help you compare repair against replacement, because some microwaves are not worth the bench time.

Microwave repair options
Technician testing appliance control boards with probes on a workbench
03♨Reliable service

Refrigerator Repair

Not cooling, leaking water, icing over, or running constantly. What we actually find, in order: dirty condenser coils, a failed evaporator fan, a worn door gasket, and only then the compressor. Humid East Tennessee summers push aging fridges hard, so we check all four before quoting a price.

Refrigerator repair services
Technician soldering an appliance circuit board on a workbench
04⚑Trusted repairs

Oven Repair

Never preheats, bakes unevenly, or the broiler quit entirely. Oven dials lie, so we put a thermometer in there and check the bake element, igniter, and temperature sensor against what the display claims, then verify the real temperature before we leave.

Oven repair help
Close-up of hands soldering a green appliance control board
05!Urgent response

Washing Machine Repair

Will not spin, will not drain, leaves water on the floor, or walks across the laundry room mid-cycle. The free checks come first: load balance and leveling. Then we trace the failure to hoses, the water inlet valve, or the drain pump, and we tell you honestly when a washer is worth fixing and when it is not.

Washer repair options
Technician servicing an outdoor condenser unit
06◆Kitchen help

Dishwasher Repair

Standing water in the bottom, dishes coming out gritty, or a leak at the door. The usual suspects are a clogged filter, a failed drain pump, or a blocked disposal knockout. We find the failed part on site and quote an upfront price before any work begins.

Dishwasher repair details
Technician repairing a motor assembly on a workshop bench
07●Laundry day

Dryer Repair

Tumbles but never heats, shuts off mid-cycle, or takes two runs to dry a load. A failed heating element, a blown thermal fuse, or a lint-choked vent causes most of it. We test the heating circuit first and tell you straight whether the dryer is worth the repair.

Dryer repair options
Hands testing an appliance circuit board with multimeter probes
08■Keep it frozen

Freezer Repair

Frost building up thick, running nonstop, or food thawing at the edges. A failed defrost heater, a weak door gasket, or a thermostat that never cycles off is usually behind it. We diagnose the defrost system honestly, including when replacement makes more sense.

Freezer repair details
Technician inspecting electrical wiring and controls
09▲Cold drinks

Ice Maker Repair

No cubes, hollow cubes, or water leaking into the bin. A failed water inlet valve, a frozen fill tube, or a clogged filter causes most ice maker failures. We test the valve and fill system on site and quote an upfront price before we start.

Ice maker repair details
Modern kitchen with a stainless steel French-door refrigerator

Not sure which category fits? Tell us what you see, hear, or smell and we’ll route the right technician.

Describe the problem

From call to all clear

Our Appliance Repair Process

You always know what happens next, what needs your approval, and how we confirm the repair worked.

01

Initial Consultation

Tell us what you see, hear, or smell: the rattle, the puddle, the error code. That description decides which technician comes and which parts ride along.

02

Diagnosis

On site, we test the suspect parts first: heating element, thermostat, water inlet valve, control board. We show you what failed and explain it in plain language.

03

Repair

With your approval, we make the repair with quality replacement parts. Nothing starts until you have agreed to the full price.

04

Post-Repair Check

We re-test the appliance, walk you through what was done, and leave simple care tips, like keeping condenser coils clean, so the fix lasts.

Why homeowners choose us

Why Oak Ridge Homeowners Call Us

No scripts, no pressure. Here is how we run every visit, and how you can check our work. The U.S. Department of Energy’s Energy Saver guide is also worth a read between visits: simple upkeep habits make repairs less frequent.

01Diagnosis before dollarsWe test the actual parts: compressor, control board, igniter, drain pump. You get the cause in plain language and a price before we touch a wrench.
02Upfront, honest pricingMost repairs land between $129 and $299. A door gasket or igniter sits at the low end; a compressor or control board at the high end. What moves the price is the part and the labor involved, and you approve it all before work starts.
03Local routes, real windowsOur dispatch office sits on the Oak Ridge Turnpike, and we run regular routes through 37830. Call (865) 324-1626 Mon–Fri, 8AM–6PM, and we will give you a real arrival window.
Technician adjusting controls inside an electrical panel
Mon–FriOpen 8AM–6PM · a real person answers

Questions before we arrive

Service Questions, Answered

Technician testing appliance control boards with probes on a workbench

Still unsure? A team member can help identify the safest immediate step and the right appointment type.

Ask us now
What appliances do you repair in Oak Ridge?

We repair five appliance types: stoves (burners, igniters, glass tops), microwaves (magnetrons, door latch switches, control boards), refrigerators (compressors, evaporator fans, door gaskets, condenser coils), ovens (bake elements, igniters, temperature sensors), and washing machines (drain pumps, water inlet valves, hoses). If you are unsure whether yours is worth fixing, that is exactly what the diagnostic visit answers.

How long does a typical appliance repair take?

Most repairs finish in a single visit, usually within one to two hours once the diagnosis is confirmed. If a part has to be ordered, we tell you the expected timeline before you approve anything, and we return as soon as the part arrives.

Do you repair appliances in rental properties?

Yes. We work in occupied homes, rentals, condos, and HOA-managed properties across Oak Ridge. We coordinate access with tenants or property managers and provide documentation owners can keep for their records.

What happens if my appliance cannot be fixed?

We tell you plainly. If the part is discontinued, the sealed system has failed, or the repair would cost more than half of a comparable new machine on a unit past its prime, we explain why and help you weigh replacement. The trade calls it the 50% rule, and we apply it honestly even when it costs us the job. You pay for the work you approve, never for a guess.

Do your technicians carry common parts on the truck?

We stock the parts that fail most often: igniters, heating elements, door gaskets, drain pumps, thermostats, and common switches. When you describe the symptom on the call, we match the truck stock to it, which is how most of our jobs finish in one visit. Specialty parts are ordered with your approval.

Pick your service and call

Ready to Book a Repair Visit?

Call (865) 324-1626, Mon–Fri 8AM–6PM. Tell us the appliance and the symptom, and we will match the right service to it. Most repairs run $129–$299 with the price approved before we start.

Technician servicing a wall-mounted air conditioner unit

Talk with the local team

Contact Oak Ridge Quick Air Fix

Reach out any time. We answer phones Monday through Friday, 8AM to 6PM, and we reply to every message.

1980 Oak Ridge Tpke, Oak Ridge, TN 37830Dispatch office · technicians serve the full area

Thanks, your request is in. We will contact you shortly.

One call covers them all

We Service All Major Brands

GE, Samsung, Whirlpool, LG, KitchenAid, Frigidaire, Kenmore, Maytag, Bosch, Electrolux, Amana, Hotpoint, and more.

We are not a factory-authorized dealer for any brand. Have your model number handy when you call (865) 324-1626 and we will confirm we can service your unit.

See the full list of brands we service

Call dispatch